DVC710 Program Loader Monitor Software Features:
The Program Loader Monitor (PLM) is the user interface to download programs to the DVC710 and to display information from all of the DVC modules connected together. Data from a DVC expansion module (i.e. DVC722, DVC741, DVC61, etc.) is transmitted through the DVC710 to the PLM.
The PLM is also the tool to analyze, monitor and modify I/O parameters such as Ramps, Dither and other I/O settings during commissioning. However these changes are only stored in RAM and need to be saved to a file, imported into the application, re-compiled via the Programming Tool (PT) and then downloaded into the DVC via the PLM to make the changes permanent. An application can be created in such a way using EEMemory to allow these I/O settings to be permanent without using the PT.
All applications are created and/or modified using the PT, then downloaded into the DVC and fine tuned via the PLM.
Download a free copy of the Program Loader Monitor for your use;
Download Size: 119 Mb
OS: Windows XP Professional, Windows Vista Business or Ultimate, Windows 7-32 or 64
PC with Serial Port: For USB ports you need a USB to RS232 converter (i.e. Dongle)
Communication: RS-232 Serial cable P/N: 999-10075
Download & installation instructions:
- Click here to download.
- Save the zip file to a temporary file location on your computer.
- Unzip ("Extract All") the files to your temporary location.
- Run the SETUP.EXE file, and click finish to complete the installation.
- The Demo version of the Intella Suite will only work in Simulation Mode (will not drive any outputs) and requires a DVC710 connected to run the Simulator.