evc-2, Dual Channel Valve Controller GUI Software Features:
This pre-written PC based graphical user interface ( GUI ) and corresponding application software allows the user to connect, calibrate and immediately use two separate input and output channels in one controller, making it ideal and very cost effective for open loop valve control or directional proportional control solutions.
The evc-2 controller comes pre-loaded with the application files necessary to utilize the features of the Dual Channel GUI. If you currently have the DVC7 controller and wish to use the Dual Channel GUI, you may purchase the GUI, P/N: 023-00254 which comes with the application code, 025-00057 allowing the DVC7 to operate as a evc-2.
The controller ( evc-2 or DVC7 ) operates from a wide supply range of 10 to 32VDC so this one unit can interface with any OEM coils of either 12VDC or 24VDC with a current requirement of up to 3 Amps per coil. The GUI is designed around three easy to navigate pages where page 1 is the 'Dashboard' giving a real time overview of the controller health and input/output state. Page 2 allows the user to quick-configure the type of command required, choosing from DC Volts (0 to +5V) or Current ( 4 to 20mA ) and also select single or dual coil output configuration. And page 3 shows all the other necessary adjustments that will be needed to individually set-up and optimize each channel, including Min & Max coil currents, UP/DOWN ramp times and dither amplitude / frequencies etc.
evc-2 Dual Channel GUI and Application Code
|evc-2 GUI Part Number:||P/N: 023-00244, 16.5 Mb - Call for pricing.|
|evc-2 Application Code Part Number:||P/N: 025-00057, included with 023-00254 GUI|
|OS:||Windows XP Professional, Windows Vista Business or Ultimate, Windows 7-32 or 64|
|PC with Serial Port:||For USB ports you need a USB to RS232 converter (i.e. Dongle)|
|Communication:||RS-232 Serial cable P/N: 999-10075|